P4 LED Module: Full Color Indoor Panels for Visual Media


Release time:

2026-11-17

We at Linluryn make this P4 LED Module as part of the indoor full color LED display range. The product page gives the image quality, the reliability, the splicing and the input options, and it lists the P4 technical data. This article explains what the module is for and what a project should check before an order.

What the P4 Module Is

A P4 LED module is a panel with a 4 mm pixel pitch. The pitch is the distance between two LEDs, so a smaller pitch gives a finer image at a close viewing distance. The P4 module sits in the middle of the indoor range, and it suits a stage backdrop, a large venue or a retail wall where the viewer stands a few meters away.

The page describes the module as the core medium for visual information in commerce, government, culture and entertainment. That is a broad use, and it is the reason a P4 module is often chosen for a hall or a display wall rather than a single screen in a small room.

Image Quality

The page says the module supports 4K to 8K display, with more than one billion colors and a high grayscale. A high grayscale is what keeps a dark scene from looking flat, and a wide color range is what makes an image look natural. The buyer should ask for a demo with a real video, not only a color bar.

The P4 data lists a brightness of 400 to 1000 nits per square meter and a refresh rate of at least 1920 Hz. A higher refresh rate reduces the flicker on a camera. A project that films the screen should confirm the refresh and the shutter of the camera, because a screen that looks fine to the eye can band on video.

Reliability and Life

The page says the module uses a constant current drive and a static scanning method, with a service life of more than 100,000 hours and a low failure rate. The life figure is a design target, and the real life depends on the power supply, the heat and the environment. The buyer should confirm the driver, the power supply and the ventilation.

A LED wall runs for many hours a day. A cabinet with a good heat path and a stable power supply will last longer than a cabinet that is packed into a small space. The buyer should ask for the power consumption and the heat load, and should plan the air conditioning or the ventilation for the room.

Splicing and Maintenance

The page says the modular design supports seamless splicing and can be combined into different sizes. It also says the module supports front and back maintenance, so a single module can be replaced without removing the whole wall. That is a real cost saving for a wall in a public space, where a dead pixel or a module has to be fixed quickly.

The buyer should confirm the cabinet size, the module size and the service access. A front service wall needs a clear space in front, and a back service wall needs a corridor behind. The page lists a 320 by 160 mm module and a 256 by 256 mm module for the P4 group, so the cabinet design should match the module that is ordered.

Control and Inputs

The page says the module supports HDMI, DVI and optical fiber inputs, with remote control and cluster management. A control room can send a signal over a fiber run, and a manager can check several screens from one platform. The buyer should confirm the sending card, the receiving card and the software with the supplier, because a screen is only as good as its control system.

The page also lists a high efficiency power supply, a low power design and an automatic brightness adjustment. An auto brightness function is useful for a wall near a window, where the ambient light changes during the day. The buyer should test the sensor and the dimming curve with the actual room light.

About Linluryn

Linluryn presents COB, indoor, outdoor, rental, transparent and flexible module series, and it lists stage, mobile, commercial, control center, sports and creative display solutions. The company also lists a factory equipment page, a qualification page and a service page. A buyer can ask for a cabinet drawing, a power calculation and a sample module for the project.

Next Step

To request a quotation for the P4 LED Module, send the viewing distance, the screen size, the resolution, the brightness, the input signal, the installation and the destination. We will confirm the module, the cabinet and the control system that fit the wall. A sample and a specification sheet can be provided for the approval.